Easy to install
Enables dimming of both traditional
fluorescent and LED Lighting from one dimming unit
Options available for both Constant Current & Constant Voltage LED
Along with the rise of LED illumination, LED lamps are widely used in hotels, business centres, household decoration etc. There are more and more chances to use LED and fluorescent lights at the same project, if LED lamps and fluorescent lights can be controlled together by a traditional fluorescent dimming system, it will make everything more convenient, but the dimming principles of LED and traditional fluorescent lights were different, LED lights could not be dimmed by the traditional fluorescent dimming controller.
Because of this the new Trado 0-10V to PWM dimming pack was developed to solve the compatibility issues of fluorescent dimming systems and LED illumination.
LED lights can now be controlled by many traditional intelligent dimming systems.
NOTE: The Trado 0-10V DC CV Dimming Pack and Trado 0-10V DC CC Dimming Pack can be connected together on the same dimming system, which is convenient for controlling different LED lamps with different voltage and power.
The Trado is only suitable for 0-10V DC voltage control, not suitable for resistive control.
Trado 0-10V DC Constant Current LED Dimming Pack
||Max. Output Power
||350mA x3 Channels
||1-12 1W LEDs
16.8W per Channel
||700mA x3 Channels
||1-12 3W LEDs
33.6W per Channel
||Working Temp. Range
|0-10V DC Analog Dimming Signal
||PWM LED Dimming Signal
||-30°C to +55°C
Mechanical Dimensions (Unit mm)